- Model NO.: 101G
- Conductor Type: Stranded
- Sheath Material: PVC
- Material Shape: Compound Granuel
- Type: Insulated
- Application: Insulation for Cable
- Insulation Material: XLPE
- HS Code: 39019090
High temperature resistance Silane- XLPE Compound for wires and cables up to 3kV.
Physical and Electrical properties
|No.||Experiment item||Test method||Unit||Typical value|
|1||Tensile strength||GB/T 1040||MPa||24|
|2||Elongation at break||GB/T 1040||%||450|
|4||Change of tensile strength|
Change of elongation at break after heat aging 135ºC,168h
Elongation rate under load
Permanent deformation after cooling
|GB/T 2951.5-1997/ GB/T 1040|| |
|6||Gel content||JB/T 10437-2004||%||65|
|7||Dielectric constant 50HZ, 20ºC||GB/T 1409||2|
|8||Dielectric loss factor 50Hz, 20 ºC||GB/T 1409||3×10-4|
|9||DC volume resistivity at 20 ºC||GB/T 1410||Ω.m||1×1015|
|10||Dielectric strength||GB/T 1408.1-1999||MV/m||38|
Melt extrusion temperatures in the range of 150ºC-220ºC are recommended, the specific temperature should be adjusted by actual operation condition.
Cross-linking condition and time of the hot set elongation to 100%( 1 mm thick samples): vapor or water bath at 90ºC for 60min or at 80ºC for 120min.
Storage and transport
High temperature resistance Silane -XLPE Compound should be vacuum packed, the aluminum foil / polyethylene combination film bag for inner packing and PP woven bag / PE / Kraft paper bag for outer. A group and B group are packed in different bags: A group net weight(23.75±0.02)kg while B group(1.25±0.02)kg. Negative tolerance of each-ton material is unexpected. Besides, other packaging agreed on by both manufacturers and clients can be used.
Keep away from sunshine, rain and soaking during transport. Store in clean, dry, ventilated warehouse and the minimum storage temperature should be 0ºC.The product may be stored for up to 6 months. and it must be used out once within 8 hours after the inner packaging is opened.